Outboard Motor Bracket for Transom Mounting

Heavy-Duty Outboard Motor Bracket: Rock-Solid Transom Mounting for Serious Power

If your transom is working harder than it should, the problem usually isn’t the engine. It’s what’s holding it. This Outboard Motor Bracket exists to fix that, giving mechanics, retrofitters, and boat owners a way to mount kicker engines or heavy primaries without compromising hull integrity or performance.

Built From Marine-Grade Aluminum, Not an Afterthought

Cheap brackets flex. Cheap brackets corrode. This one doesn’t, because it’s fabricated from heavy-gauge, powder-coated aluminum engineered specifically to shrug off saltwater exposure season after season. Salt spray, humidity, the constant freeze-thaw cycle of a boat stored outdoors through winter, none of it touches the coating. Underneath that finish sits a structure stiff enough to handle real loads, not just the occasional calm-water outing.

Rated for Heavy V6 Power

Here’s the number that matters most to a lot of buyers: this outboard motor bracket 250hp rating isn’t a marketing footnote, it’s the actual tested capacity. Full-size V6 engines. Rough chop. Hard turns at speed. The bracket holds its geometry under load instead of walking or flexing the way lighter aluminum or plastic units tend to when the water gets ugly.

Why Setback Changes Everything

Moving your engine away from the transom sounds like a small adjustment until you actually feel it on the water. Setback opens up the water flow reaching the prop, which sharpens trim response almost immediately and, over a season of use, adds up to a noticeable bump in top-end speed. Anglers running a kicker off the back of a full-size outboard benefit here too, since the added clearance keeps the smaller motor’s prop wash out of the main engine’s intake path entirely.

Purpose-Built for Yamaha and Beyond

While this works across most major outboard brands, it was refined with a Yamaha Outboard Motor Bracket install in mind, matching the hole spacing and mounting geometry Yamaha owners already expect. Bolt patterns line up. No drilling guesswork, no filing down mismatched holes to make something fit that was never meant to.

Hardware That Matches the Build Quality

Every kit ships as a genuine outboard motor bracket for transom mounting, complete with pre-drilled, industry-standard hole patterns and stainless steel fasteners rated for continuous marine exposure. Skip the trip to the hardware store. Skip wondering whether the bolts you grabbed will rust out in a year. Everything needed for a secure, permanent install is already in the box, torque-ready and correctly sized.

Mount It Once, Mount It Right

A bracket is not where you cut corners on a rig you’re trusting with real horsepower. Marine Gear Depot stocks this Outboard Motor Bracket ready to ship, backed by the same commitment to quality gear that boat owners rely on for every other piece of their setup. Click Add to Cart now and get your transom set up the way it should have been from the start.