Colourless antifouling for propellers and sterndrives in a handy spray can. The spray can format allows you to apply transparent antifouling in hard-to-reach areas. The antifouling is copper free and can be used on metals. It is recommended to apply a barrier coat prior to use.
Processing instructions:
- Drying time at 20 °C: 30-40 min (dust dry)
- Overcoating time at 20 °C: min. 8-12 hours
- Launch: after 24-48 hours
Use biocides safely. Always read the label and the product information before using.
Product safety
Please note the following hazard warnings:
May cause an allergic skin reaction.
May cause drowsiness or dizziness.
Very toxic to aquatic life with long lasting effects.
Extremely flammable aerosol.
Do not spray on an open flame or other ignition source.
Dispose of contents/container to …
Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
IF ON SKIN: Wash with plenty of soap and water.
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Use only outdoors or in a well-ventilated area.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Pressurized container: Do not pierce or burn, even after use.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
Pressurized container: may burst if heated.














Reviews
There are no reviews yet.