Teak Outboard Motor Holding Bracket

Teak Outboard Motor Holding Bracket: Traditional Rail-Mount Storage for Your Auxiliary Engine

Every cruiser with a dinghy motor eventually faces the same problem. Where do you stash the outboard when it’s not bolted to the tender? A Teak Outboard Motor Holding Bracket solves it the way sailors have solved it for generations, by giving your auxiliary engine a permanent, secure home right on the stern rail. No more wedging it into a lazarette. No more scratched gelcoat.

Built From Real Teak, Not a Composite Imitation

This isn’t a plastic knockoff dressed up to look nautical. It’s solid, kiln-dried marine-grade teak, the same wood that’s protected brightwork and hardware on offshore boats for a century, chosen because it resists rot and shrugs off saltwater without cracking or warping the way lesser woods eventually do. The oils naturally present in the timber do most of the work; you’re not fighting the material, you’re just letting it age the way teak is supposed to age, silvering slightly over seasons while staying structurally sound underneath.

Fits Standard Pushpit and Stern Rail Tubing

Compatibility matters here, and this bracket clamps directly onto both 7/8 inch and 1 inch stainless steel pushpit tubing, which covers the overwhelming majority of production sailboats built over the last several decades. The included 316 stainless steel U-bolts and fasteners match the corrosion resistance of your existing rails, so you’re not introducing a weak metal into an otherwise premium system. Teak Outboard Motor Holding Bracket installation typically takes under an hour with basic hand tools, no drilling into your rails required, no hiring a rigger.

Rated to Hold What You’re Actually Carrying

The beveled wood pad creates a thick, forgiving clamping surface. That matters because a thin bracket lets a transom clamp slip under vibration, and slippage is exactly how outboards end up at the bottom of a marina. This one is rated for auxiliary 2-stroke or 4-stroke engines up to 10-15 HP, roughly 80 lbs, which covers nearly every dinghy motor cruisers actually run.

Swapping Out a Worn or Cracked Bracket

If you’re searching for a Teak Outboard Motor Holding Bracket replacement, you already know what UV exposure and years of salt spray do to an old wooden block. Splitting. Graying past the point of no return. Hardware that’s rusted into the grain. Every unit ships with clear Teak Outboard Motor Holding Bracket instructions, so pulling the old one and mounting this in its place is a weekend job, not a haul-out project.

Secure Yours Today

Your outboard deserves a mount that won’t fail you at anchor or underway. Click Add to Cart now and order your Teak Outboard Motor Holding Bracket from Marine Gear Depot, shipped fast and backed by a team that actually knows boats.